Posted on

Breitling Chronoliner Red Gold Limited Edition Fake UK Watches For Introduction

Breitling fans are never short of new pieces to gawk at, and the brand loves to keep delivering. With the Breitling Chronoliner red gold limited edition, one of their most handsome offerings gets the high-end treatment and is as masculine as a gold watch can get. Fans of the standard Breitling Chronoliner watch will no doubt lust after this piece, but keep in mind it will come in a limited run of 250 pieces.

Breitling’s Chronoliner triple time zone chronograph is inspired by watches from the 1950s and 1960s, and relays a compelling vintage spirit that doesn’t come off as contrived. Breitling Chronoliner copy watches with black dials are presented in 46mm red gold cases crowned with black ceramic bezels.

The ceramic bezel – as opposed to a metal bezel – adds a touch of class to this watch and softens the contrast of gold on black, which can at times be too loud. Red gold helps in this way as well. The numbers on the black ceramic bezel are in brushed gold to aid legibility, an important factor given that the bezel is used as a third time zone indicator.

Equipped with a triple time zone indicator, the new Breitling Chronoliner fake watches let you consult three separate time zones at a glance. As with most traditional GMT watches, local time is set with the hands and the second time zone can be consulted with a red-tipped central hand against a 24-hour scale. The third time zone is indicated on the rotating bezel, also presented in a 24-hour mode.

Combining a chronograph with a triple time zone indicator means there is a lot of information to relay, but the dial is surprisingly neat and tidy. The white tricompax display, balanced by a date window and the logo on the right, provides a sharp contrast with the matte black dial, and the 30-minute counter features six luminescent rectangles, characteristic of the Breitling Chronoliner DNA.

The subdials are decorated with a circular motif and a grey border for increased legibility, and the red gold hands and indices are treated with luminescence. In keeping with its retro personality, the chronograph functions are activated with piston-shaped pushers.

Breitling replica watches with silver sub-dials are equipped with an ETA Valjoux 7754 automatic movement, a GMT adaptation of the ubiquitous Valjoux 7750, and the movement is a COSC-certified chronometer. Water-resistant to 100 metres, the Breitling Chronoliner red gold limited edition comes on a black rubber strap which emulates the weave of the steel mesh bracelet of the Aero Classic watch.

As a limited edition, the delicate Breitling Chronoliner fake watches will be produced in a series of just 250 pieces, with a significant premium over the standard version. Non-gold, non-limited editions run $7,500-$8,400, but this Breitling Chronoliner red gold limited edition version has a price of $29,920.

Posted on

Bright UK Replica Breitling Avenger Hurricane 45 Watches Now In More Wearable Size

Breitling has elected to downsize one of their largest models, which is something we wish we could say happens more often at the brand. Originally a monstrous, doorjamb-attacking 50mm, the Breitling Avenger Hurricane was made a lot more wearable by the inclusion of Breitling’s proprietary carbon case material which they call “Breitlight.” The new bright fake Breitling Avenger Hurricane 45 comes in at a far more approachable 45mm and also tackles one of the Hurricane’s other quirks by having a more standard twelve-hour dial and movement as opposed to the twenty-four-hour “military time” dial of some of the original models.

Breitling’s new Avenger Hurricane 45 is, in essence, an Avenger Hurricane for the masses or at least those who can pull off a still very macho 45mm, tactical, statement-piece of a watch. Other than the new version’s almost reasonable size, the Breitling Avenger Hurricane 45 shares many features with its larger predecessor, the white scale replica Breitling Avenger Hurricane 12H including the Breitling manufacture B01 movement, an anti-reflective (on both sides) sapphire crystal, a screw-down crown, a case back affixed with screws, and a rubber-backed textile strap. The hyper-masculine military-inspired dial with stenciled numerals, available in this new version in black and yellow, remains stylistically unchanged compared to its 50mm predecessor other than having been downsized to fit the smaller case.

Worthy of special mention wherever present is the B01 movement included in the Avenger Hurricane 45. This 47-jewel, 70-hour power reserve manufacture chronograph caliber is entirely produced at charming replica Breitling and features registers for running seconds, 30 minutes, and 12 hours. Beating at a standard 28,800 vibrations per hour (4Hz), the inclusion of a manufacture movement gives the Breitling Avenger Hurricane 45 some points among enthusiasts and reflects a move towards more manufacture caliber-equipped models.

This is actually an intriguing move from Breitling who often insist on making carpal tunnel-inducing wrist-clocks with nary a second thought. A 45mm fake Breitling Avenger Hurricane watch with a case made of Breitling’s lightweight Breitlight material, if your wrist can pull it off, could be a pretty comfortable setup, especially given the well-executed rubber backed textile strap it comes on. Further making the new version more accessible is the decision to stick with the twelve-hour dial which is a whole lot easier for most to read at a glance. Breitling fans now have more options, and it is easy to imagine that many people who liked the 50mm Avenger Hurricane were simply unable to wear it due to its size.

If you want the “real” Avenger Hurricane experience in a 50mm case with a twenty-four-hour dial (hands-on here) to wear while pumping iron in front of your collection of vintage Arnold Schwarzenegger posters, you can still have that. But, as wrists that can accomodate that size must be far less common, the new replica Breitling Avenger Hurricane 45 makes one of Breitling’s most tactical-looking pieces more accessible to many.

Posted on

Breitling Superocean Heritage Chronoworks Fake Watches UK With Black Dials

The Breitling Superocean Heritage copy watches with black ceramic bezels cost about $40,000. If you haven’t already noticed, pricing doesn’t always seem to make sense in the watch world. There are times when otherwise interesting watches are marred by having retail prices which simply confound the consumer’s sense of reason. Sometimes those prices are actually too high, and other times the prices are fair but the consumer doesn’t understand or appreciate the reason for the high cost.

In either event, pricing practices often don’t meld with consumer expectations or perceived values. It is perhaps the biggest “issue” the luxury industry faces, given the highly active watch lover community, and the conversations contained therein, that seek to validate or veto many decisions the watch industry makes.

At Baselworld 2016, Breitling shared with us the new Breitling Superocean Heritage replica watches. “Chronoworks” is a term I haven’t heard before from Breitling, and it sounds like their version of a tuning shop where they tweak movements for better performance. In this case, the Breitling Chronoworks team began with their already in-house-made Breilting caliber B01 automatic chronograph. Breitling points to “five innovations” in the movement which, after the “optimization” from their “performance lab” (Chronoworks), is now called the caliber BC01.

What are the innovations? The question isn’t really “what,” but rather “if” these add up to the price Breitling is asking. The innovations in the movement added by the decent Breitling fake watches performance lab are a ceramic baseplate and gear-train bridges (versus metal), silicon wheels, a silicon escapement, a variable-inertia balance wheel, and elastic toothing. That all sounds cool, but what does it actually cost and what are the performance gains?

All of these features essentially act to do a few things. First is to reduce the propensity for parts to wear out, to reduce friction, to remove the effects of magnetism, to increase accuracy, and to decrease service times. Breitling doesn’t per se mention all this, but I can tell you what the point of all these parts is. Interestingly enough, all of this is a source of great controversy in the traditional watch industry. It has to do with the fact that metal parts are being replaced by non-metal parts. If the movements are still mechanical then why all the fuss?

Some watchmakers are concerned that unlike metal parts which can be reproduced relatively easily, things like ceramic or silicon parts will not be easy to replicate in the future when the movements need to be repaired or serviced. That is technically true, but it is only based on today’s available technology. We simply don’t know if in the near future the technology will exist to rapidly produce parts in silicon or ceramic. However, I do agree that the availability of parts for Breitling fake watches with Swiss mechanical movements in the future is an issue when it comes to non-metallic movement parts.